如何维护破壁专用破碎机

残破的专用磨床:这些破专用磨床整体素质是损坏很辛苦。超微粉碎机物料通过投料口进入柱形粉碎室,被沿着研磨轨做圆周运动的研磨轮碾压、剪切而实现粉碎。超微粉碎机是利用空气分离、重压研磨、剪切的形式来实现干性物料超微粉碎的设备。它由柱形粉碎室、研磨轮、研磨轨、风机、物料收集系统等组成。气流粉碎机主要适用于的粉碎机理决定了其适用范围广、成品细度高等特点,典型的物料有:超硬的金刚石、碳化硅、金属粉末等,高纯要求的:陶瓷色料、医药、生化等,低温要求的:医药、PVC。通过将气源部份的普通空气变更为氮气、二氧化碳气等惰性气体,可使本机成为惰性气体保护设备,适用于易燃易爆、易氧化等物料的粉碎分级加工。在日常维护变得更加重要。这是什么样的特殊破碎磨粉机维修重点。

Such special crusher crushing: special crusher general quality is not easy to damage. And daily maintenance is more important. This is the focus to keep this special crusher broken.

升,检查破碎专用磨床轴承的润滑性好

L. check the lubrication condition of special crusher for bearing wall

2,同检查所有的紧固部件紧固。

Check all fasteners for fastening.

3,检查传动皮带是否正确安装和良好的条件,如果在有油的皮带或皮带轮发现损坏的皮带应及时更换,用干净的布及时擦去。

Third, check that the belt is installed correctly and in good condition. If the belt is that the belt is damaged, it should be replaced. When the belt or slot wheel has oil, wipe it with a clean cloth.

4,检查破碎专用磨床是好后卫,后卫如果发现不安全现象,应及时排除。

Fourth, check whether the special crusher protective device is good, if found unsafe, should be excluded.

5、检查是否破损腔内有无物料或其他一些杂物,若有时应清除环境干净。

Fifth, check the hole without material or other debris, if sometimes should be removed.

从顶部或从顶部机螺杆6,专用止回阀液压破碎破碎头已经缩回,垫圈已正确安装和调节的压缩。

Six, special mill hydraulic, check whether the plug or top wire rod is back, adjust the gasket installation correctly, press.

 如何维护破壁专用破碎机